You might think that you need to hire a professional plumber for every plumbing project around your home. But that’s not necessarily the case! There are some projects that you can definitely handle on your own.
For example, if you have a clogged sink or toilet, you can usually fix this yourself with a plunger or plumber’s snake. These are simple tools that anyone can use, and they’re usually all you need to get the job done.
Of course, there are some projects where it’s definitely best to call in a professional. If you’re dealing with a significant leak, for example, or if your plumbing is outdated and needs to be replaced, then it’s time to call in a licensed contractor. Plumbers can also be helpful if you’re planning a renovation and need help with the plumbing layout.
So next time you’re facing a plumbing problem, take a moment to assess whether or not it’s something you can handle on your own. You might be surprised at how much you can do!
How To Replace A Toilet
If you’re considering replacing your toilet, don’t worry – it’s not as difficult as you might think. In fact, the hardest part is probably moving the old bathroom out of the way.
Once that’s done, clean up the closet flange and add a new wax ring before setting the new toilet. After you tighten the bolts at the base of the bathroom and hook up the water supply, you’ll be good to go.
The only potential obstacle is if your current closet flange is so rusted that it can’t be reused. In that case, you may need to hire a plumber to install a new one on a concrete slab floor. If you have a wood subfloor, installing a new closet flange is also a DIY project.
So there you have it – replacing your toilet isn’t as daunting as it may seem at first glance. So if your old one is starting to show its age, don’t hesitate to give it an upgrade!
How To Install A Dishwasher
If you’re planning to install a new dishwasher, there’s no need to be intimidated by the process. While it’s true that you’ll need to make some connections for both the water and electricity, it’s not as complicated as it might sound.
The first step is to remove your old dishwasher. This is usually just a matter of disconnecting the power and water lines and then pulling the unit out of its space. With the old dishwasher out of the way, you can then move the new one into place.
Before you start hooking up any lines, take a few minutes to level the dishwasher. This will ensure that it runs smoothly and doesn’t create any unwanted noise during operation. Once it’s level, you can then connect the water line.
For most homes, attaching a flexible hose to the existing plumbing will be a simple matter. However, if your home doesn’t have an accessible water line or you’re not comfortable connecting it, you can always hire a professional plumber to do the job for you.
With the water connection taken care of, all that’s left is to connect power to your new dishwasher. Again, this is usually just a matter of attaching a cord or plugging into an existing outlet behind your unit. If everything looks good so far, go ahead and turn on your dishwasher (after adding detergent!) and run a test cycle before calling it quits for good!
Why You Should Add Pipe Insulation To Your Home
If you want to save money and energy, foam pipe insulation is a great way to do it. By keeping the heat in the water pipes, you can avoid wasting water while waiting for the hot water to arrive. Plus, it’s an inexpensive way to insulate your home.
You can find foam pipe insulation at most hardware stores. Just cut it to size and wrap it around any exposed hot water pipes. You’ll be surprised at how much difference it makes.
How To Install Or Replace A Garbage Disposer
Installing or replacing a garbage disposer can be daunting, especially if you have to do it yourself. Units can weigh 10 to 15 pounds—even up to 20 pounds. Having a partner help hold the disposer while you secure it to the bottom of the sink helps immensely.
Once you have the disposer in place, you still need to do a few things before turning it on. First, check for any leaks around the unit. If everything looks good, then go ahead and turn on the water supply and flip the switch to test it out.
If you’re having trouble getting your disposer installed or replaced, don’t hesitate to call a professional plumber for assistance.
How To Fix A Broken Pipe
If you have a broken plumbing pipe, you should first shut off the water. You can usually find the main shut-off valve somewhere on the perimeter of your home. If you’re lucky, there may even be an intermediary shut-off valve near the broken pipe.
Once the water is turned off, you can assess the situation and decide how to fix the pipe. With only a few simple tools and inexpensive materials, you should be able to fix it yourself.
For example, if you have a mid-run copper pipe that has sprung a leak, you can cut it on both sides of the breakpoint and remove it. Then, you can join PEX plastic pipe to both sides of the copper with push-fit fittings or crimp-style fittings.
Alternatively, you may decide to install a lever shut-off valve instead of a piece of pipe. This does need to be located in an exposed location, though.
No matter what option you choose, remember that your home always has the main shut-off valve located somewhere on its perimeter. So if something goes wrong again in the future, at least you’ll know where to find it!
How To Install Or Replace A Faucet Aerator
If you’re looking for a way to make your water feel softer and smoother, a faucet aerator is a great option. Faucet aerators introduce air into the water stream, which gives the water a more luxurious feel.
Unscrewing your current faucet aerator is easy enough – just turn it counterclockwise. If the screen is clogged with sediment, tap it out upside down until it’s clean. Otherwise, new faucet aerators are inexpensive enough that it’s often worth buying and installing a replacement.
How To Replace A Showerhead
If you’re like most people, you probably don’t think about your showerhead very often. But if it starts leaking or doesn’t seem to be working as well as it used to, then it’s time to replace it.
Fortunately, replacing a showerhead is a relatively easy task that can be done entirely by hand. Just follow these simple steps:
- Stand on a dry, level spot in front of the showerhead.
- Use your hand to turn the showerhead out counterclockwise. If you need assistance, you can use channel lock pliers to get it started.
- Add some Teflon tape to the shower discharge pipe, wrapping it clockwise on the pipe.
- Replace the showerhead by screwing it back on in a clockwise direction until tight.
How To Fix Low Shower Water Pressure
If you’re dealing with low water pressure in your shower, it can be a real pain, especially when trying to get ready quickly in the morning. Fortunately, you can do a few things to fix the problem.
One of the most straightforward solutions is to remove your current showerhead and replace it with a new one. This will often improve water flow and help increase pressure. If your shower head is clogged with sediment, however, soaking it in vinegar can usually clear out the blockage and improve water flow.
So if you’re dealing with low water pressure in your shower, don’t despair – there are ways to fix it!
How To Replace Or Reseal A Tub Drain
Like most people, you probably don’t think much about your tub drain until it becomes clogged or starts leaking. But did you know that there’s actually a right way and a wrong way to remove your tub drain?
The wrong way is to just yank it out with a pair of pliers. This can damage the drain and cause leaks. Using a screwdriver or a unique tool called a tub drain remover is the right way.
To remove the drain, first, unscrew it counterclockwise. Then, set it aside carefully. Next, you’ll need to apply a clay-like substance called plumber’s putty around the drain hole. This will help prevent leaks when you replace the drain.
Roll the putty out into 3/8-inch rope-like pieces and press them onto the tub around the hole. Replace the drain and tighten it in place. Wipe away any excess putty with your finger before turning on the water to test for leaks
How To Caulk A Tub
If you’ve ever had to deal with a moldy or mildewy bathtub, you know that it’s not a fun task. But sometimes, no matter how much you clean, the caulk just gets too gross to be saved. That’s when you have to remove the old caulk and recaulk it.
The first step is to ensure you’ve removed all traces of the previous caulk. This can be a bit of a challenge, but it’s essential to get it all off so that the new caulk will adhere properly. Once you’re sure that the surface is clean, add painter’s tape on either side of the intended caulking line. This will help avoid spreading the caulk onto the rest of the tub or tile surround.
Next, squirt some caulking into the joint with a caulking gun. Then use your finger to smooth it into place. Be sure to remove the tape before the caulking dries so that you’ll end up with a nice, even joint.